Phantom 4 Series Intelligent Flight Battery

Description

DJI Phantom 4 Series Intelligent Flight Battery

The DJI Phantom 4 Series Intelligent Flight Battery is engineered to be the core energy source for one of DJI’s most successful and versatile drone lines—the Phantom 4 family. Whether you are an aerial cinematographer capturing stunning visuals, an industrial surveyor conducting critical inspections, or a mapping specialist executing precise geospatial data collection, the battery is designed to support your flight demands with reliability and intelligence.

This is not just a battery; it’s a smart energy system integrated with advanced electronics that provide real-time feedback, enhanced safety measures, and adaptive charging, helping extend your flight time while protecting the battery’s longevity and performance. DJI’s commitment to quality ensures that every flight you take is powered by a battery that communicates with your drone for optimal results.

Extensive Features and Benefits

1. High-Density Lithium Polymer (LiPo) Technology for Maximum Energy

At the heart of this battery lies the advanced 4-cell Lithium Polymer design with a capacity of 5870mAh and a voltage of 15.2V, delivering an impressive energy capacity of 89.2Wh. This combination balances lightweight construction with powerful output, giving your Phantom 4 drones the ability to stay airborne for approximately 28 to 30 minutes under ideal conditions, allowing enough time to complete complex tasks without frequent battery swaps. The high energy density also ensures a steady voltage supply even during intense flight maneuvers, which helps stabilize gimbal movement and camera performance for sharp and smooth footage.

2. Intelligent Battery Management System (BMS) for Real-Time Safety

The battery’s embedded Battery Management System is more than just a monitoring chip — it is a guardian that tracks every parameter essential to flight safety. It continuously assesses voltage levels of each cell, temperature fluctuations inside the battery pack, charge-discharge cycles, and overall health. This intelligent system communicates live data to your DJI GO 4 or DJI Pilot app, alerting you about remaining flight time, battery health warnings, or any anomalies during operation. This feedback loop significantly reduces risks related to unexpected battery failures by allowing pilots to plan flights confidently.

3. Optimized Charging and Discharging Protocols for Longevity

Overcharging and deep discharging are among the top reasons lithium batteries degrade prematurely. DJI’s intelligent battery features automatic cutoffs to prevent both scenarios. Once the battery reaches full charge, it stops accepting current to avoid overcharging. Similarly, the battery will refuse to operate if the voltage drops below a safe threshold to avoid damage caused by deep discharge. These protocols help maintain consistent performance over hundreds of charge cycles, ensuring your investment lasts longer and performs reliably.

4. Smart Auto-Discharge Feature for Safe Storage

Long-term storage can be a major challenge for drone batteries. The DJI Phantom 4 battery solves this problem with an automatic self-discharge function. If left unused for more than 10 days, the battery gradually discharges itself to approximately 50-60% of its capacity, which is the optimal level for storage. This prevents cell degradation, swelling, or capacity loss caused by holding a battery at full charge for extended periods, making it safer to store and ready for use even after weeks or months.

5. Comprehensive Thermal Protection for Diverse Conditions

Flying in various environments exposes batteries to a range of temperatures that can impact performance and safety. To combat this, the battery includes multiple temperature sensors that constantly measure internal and ambient temperatures. If the battery gets too cold (below 0°C) or too hot (above 40°C), charging or discharging will be restricted until the temperature returns to a safe range. This feature enables stable performance across different climates, from hot summer days to cold mountain operations, preventing overheating or freeze damage.

6. Convenient LED Indicators for Instant Status Updates

Located on the battery casing are four LED lights that provide quick visual cues about charge level and battery health. Simply press the power button once to illuminate these indicators, letting you know whether the battery is fully charged, partially charged, or low on power. The LEDs also flash specific error codes in case of faults such as cell imbalance, temperature warnings, or charging issues, helping users identify problems immediately without needing to connect to an app or device.

6. Precision Fit and Compatibility Across Phantom 4 Models

This battery is custom-built for the DJI Phantom 4 series, including the original Phantom 4, Phantom 4 Pro, Phantom 4 Advanced, and Phantom 4 RTK. The design ensures a perfect fit with secure locking mechanisms inside the drone’s battery compartment, providing reliable electrical contact and protection against vibration during flight. Because it interfaces directly with the drone’s flight controller, the battery supports all system checks, firmware updates, and power management functions seamlessly, allowing for smooth, uninterrupted operation.

7. Support for Creative and Industrial Applications

The DJI Phantom 4 Intelligent Flight Battery powers more than just consumer drones. Its robust design, safety features, and reliable power output make it suitable for professional filmmakers shooting complex scenes, agricultural surveys requiring long flight endurance, infrastructure inspections where stable operation is critical, and emergency response where mission success depends on battery reliability. Its ability to sustain consistent voltage means camera sensors and gimbals perform without flickering or power drops, preserving image quality throughout the flight.

Detailed How to Use Instructions

1. Before inserting, inspect the battery for any physical damage or swelling to ensure safety.

2. Insert the battery into the drone’s compartment until you hear a secure click, confirming it’s locked in place.

3. Press the power button once, then press and hold for 2 seconds until the LED indicators light up, signaling the battery is powered on.

4. Use the DJI GO 4 or DJI Pilot app to monitor real-time battery status, flight time estimates, and health data.

5. After completing the flight, remove the battery and allow it to cool naturally for 15-30 minutes before plugging it into the charger to prevent overheating.

6. Charge the battery using only the official DJI Phantom 4 charger or a compatible charging hub designed for this battery model.

7. Store batteries partially charged and in a cool, dry place if they will not be used for several days or weeks.

Best Practices for Battery Maintenance

1. Always store the battery at approximately 50–60% charge when not in use for extended periods; this helps preserve cell health.

2. Avoid exposing the battery to extreme temperatures during storage — neither freezing cold nor intense heat.

3. Perform regular firmware updates via DJI Assistant 2 to maintain optimal battery management and safety features.

4. Regularly clean the battery terminals with a soft, dry cloth to ensure good electrical contact and avoid dirt buildup.

5. Rotate multiple batteries to balance usage and charging cycles evenly, maximizing the lifespan of your fleet.

Do’s & Don’ts for Safe and Efficient Battery Use

Do’s

• Do inspect the battery before every flight for physical deformities or signs of damage.

• Do store the battery in a fireproof bag during air travel or long-distance transport.

• Do charge the battery in a well-ventilated area on a non-flammable surface.

• Do regularly monitor battery health statistics using the DJI app to anticipate replacement needs.

• Do keep batteries away from children and pets to prevent accidental damage.

Don’ts

• Don’t use damaged, swollen, or leaking batteries under any circumstances.

• Don’t leave batteries charging unattended for extended periods.

• Don’t expose batteries to water, humidity, or corrosive environments.

• Don’t attempt to disassemble or repair the battery yourself — always rely on official DJI service centers.

• Don’t fly the drone if the app warns of low battery or battery health issues; land immediately and check the battery condition.

Why Choose the DJI Phantom 4 Series Intelligent Flight Battery?

This battery is more than a power source; it’s an advanced energy management solution designed to meet the demanding needs of professionals. By combining cutting-edge LiPo technology, intelligent real-time monitoring, and adaptive safety features, DJI ensures that you can focus on your mission without worrying about power failure or battery damage.

When flying a Phantom 4 drone, the battery plays a vital role in mission success, whether capturing cinematic masterpieces or performing critical industrial inspections. The DJI Phantom 4 Intelligent Flight Battery supports your drone’s high-performance systems while maximizing safety and flight time, helping you unlock the full potential of your aerial device.

Empower your Phantom 4 Series drone with a battery that blends intelligence, power, and safety into every flight. Get ready to fly longer, safer, and with more confidence than ever before.