DJI Neo Two-Way Charging Hub

Description

DJI Neo Two-Way Charging Hub – One Hub, Two Powers, All Convenience

The DJI Neo Two-Way Charging Hub is the official power buddy for your DJI Avata 2 drone batteries. It’s not just a charger—it’s a smart multitasking beast that powers your gear efficiently, keeps your workspace neat, and makes travel-time charging way less of a hassle. Whether you’re recharging batteries or using it as a power bank for your phone or goggles, this hub handles the backstage work so your drone show runs smoothly.

Key Features of the DJI Neo Two-Way Charging Hub

1. Dual Function: Charger and Power Bank in One

Why carry two devices when one can do it all? The Neo Two-Way Charging Hub not only charges up to three Avata 2 batteries one after another, but also acts as a portable power bank. Just connect your USB-C device—like your DJI Goggles, controller, or smartphone—and boom, it starts charging them using stored battery power. It’s like a power swap meet—battery energy goes where it’s needed, and you stay powered wherever you go.

2. Intelligent Charging Sequence for Max Efficiency

This hub doesn’t just blindly push power into batteries. It’s smart enough to scan which battery has the most remaining charge and starts with that one first. Why? Because it gets your drone back in the air faster. This efficient sequencing means no wasted time waiting for a dead battery to fill up first. Perfect when you’re racing daylight or battling a low-fly window.

3. Designed for DJI Avata 2 Batteries Only

The hub fits only Avata 2 Intelligent Flight Batteries, and that’s intentional. It has the correct voltage handling, secure fit, and system compatibility designed specifically for this battery model. No guessing, no wiggling, and no risky hacks. It’s tailor-made to work flawlessly within the DJI ecosystem.

4. Compact, Foldable, and Adventure-Ready

Small in size, big on functionality. The Neo Two-Way Charging Hub is built to travel. Toss it in your gear bag and take it anywhere—no bulky adapters or weird connectors needed. Its foldable design keeps things neat, and the tough build can handle life on the go, whether you’re charging on a mountaintop or mid-commute.

5. Fast Charging with 65W Support

Pair the hub with DJI’s 65W Portable Charger (or any other 65W USB-C charger that supports PD) and you’ll get rapid charging that cuts down wait times. Your batteries get recharged fast so you can keep filming, flying, or flipping in the air. Plus, it intelligently cools itself, so there’s no overheating drama while it’s working hard behind the scenes.

How to Use

• Connect the hub to a 65W USB-C power source using a compatible cable.

• Insert up to three Avata 2 batteries into the charging slots.

• The battery with the most power will charge first, followed by the rest.

• Use the USB-C port to charge your phone, goggles, or controller using battery power when no wall outlet is nearby.

• LEDs show charging status and power levels.

How to Clean

• Use a soft, dry microfiber cloth to clean the hub’s surface and connectors.

• Blow away dust inside the ports gently with compressed air or a soft brush.

• Never use water, alcohol, or spray cleaners near the USB ports or battery terminals.

• Store in a dry area when not in use to avoid moisture build-up.

• Regularly check for dirt around the ports if used outdoors frequently.

How to Take Care

• Always charge in a well-ventilated, cool area to avoid overheating.

• Don’t leave batteries inside the hub for long-term storage.

• Use only DJI-approved chargers for best results and safety.

• Disconnect all cables and batteries after charging is complete.

• Transport the hub in a protective pouch to prevent damage to connectors.

Do’s & Don’ts

Do:

• Use with original Avata 2 batteries only.

• Keep the firmware of your drone and accessories updated for full compatibility.

• Store at room temperature away from direct sunlight.

• Monitor LED indicators for battery health and hub status.

• Keep the USB-C port clean and free of debris.

Don’t:

• Mix batteries from different models or third-party brands.

• Charge in hot, humid, or rainy environments.

• Use the hub with damaged cables or cracked ports.

• Try to charge more than three batteries at once.

• Leave connected devices charging overnight unattended.

Final Words – Smarter Charging, Smoother Flying

The DJI Neo Two-Way Charging Hub is built for drone pilots who don’t want power problems slowing them down. Whether you’re charging multiple batteries on set or using battery juice to top off your goggles in the wild, this smart little gadget delivers time-saving convenience in a travel-friendly form. It’s compact, clever, and designed to keep your Avata 2 ecosystem running like a well-oiled propeller.

Stay charged, stay flying—grab your Neo Two-Way Charging Hub today and power up like a pro.